Development and performance evaluation of a natural draft mixed-type solar dryer for agricultural products

Reduced moisture content enhances storage properties of agricultural products and reduces post-harvest losses. Effective drying can be achieved using solar dryers in regions with abundant solar radiation. In this study, a natural draft mixed-type solar dryer suitable for rural communities of developing countries was developed. The performance of the solar dryer was also investigated using pepper, okra and tomato. The temperature taken at different points of the drying chamber and the auxiliary collector show that the temperature within the drying chamber is higher than the ambient temperature. The temperature within the drying chamber was also found to depend on the atmospheric conditions. The maximum drying rate was obtained at periods between 1200 and 1400 hrs Nigeria local time during which the temperature within the solar dryer is also maximum. Temperature within the solar dryer reached up to 62°C. The solar collector efficiency was 52.0% while the drying efficiency was 21.9%.Peer reviewe

Design and development of waste sorting machine

Nigeria is yet to develop a comprehensive scheme which is required to solve the current and persisting problem of waste management in the country. Whereas the crude methods of sorting wastes practiced may be efficient, it wastes useful time; hence the need for a mechanized sorting machine. An attempt has been made to develop a waste sorting machine, which is conceptualized to sort wastes into light materials, ferrous metals and other heavy materials. The machine is designed with the major components being the fan, the belt conveyor and the magnet. Tests carried out on the machine successfully classified wastes into light materials and heavy materials with inability to sort ferrous metals. Samples of wastes tested weighed 1.15kg and 3.53kg. The wastes consisted of an average of 32% of light materials and the time to sort the waste was 65 minutes per unit mass. This machine separates light materials such as paper, nylon, textile and heavy materials similar to nylon, ferrous and non ferrous metal, glass and paper sorted by the machine developed by Falayi et al. (2007) and the machine designed by Adzimah and Anthony (2009)

An Investigation of the Effects of Manufacturing Parameters On Properties of Binderless Boards Produced from Abura (Mitragyna Ciliata) Sawdust

The production of particle boards without the use of synthetic binders is desirable to prevent environmental problems. This study has produced experimental binderless boards from untreated sawdust from Abura wood using a laboratory press. Box-Behnken experimental design was utilized to investigate the effects of the pressing variables including pressure, temperature and pressing time. The density of the boards produced ranged between 523.69 and 738 kg/m3 which was within the range specified for medium density fibreboards . The maximum values for Modulus of Elasticity (MOE), Modulus of Rupture (MOR) and Internal Bonding Strength (IB) were 100.4 MPa, 1.1 MPa and 0.049 MPa, respectively. It was shown that, for the range of factors studied, pressure and the pressing temperature were the more significant factors in determining the density, MOE and IB. This study showed that the sawdust can potentially be used for the production of binderless boards

An Investigation of the Effects of Manufacturing Parameters On Properties of Binderless Boards Produced from Abura (Mitragyna Ciliata) Sawdust

The production of particle boards without the use of synthetic binders is desirable to prevent environmental problems. This study has produced experimental binderless boards from untreated sawdust from Abura wood using a laboratory press. Box-Behnken experimental design was utilized to investigate the effects of the pressing variables including pressure, temperature and pressing time. The density of the boards produced ranged between 523.69 and 738 kg/m3 which was within the range specified for medium density fibreboards . The maximum values for Modulus of Elasticity (MOE), Modulus of Rupture (MOR) and Internal Bonding Strength (IB) were 100.4 MPa, 1.1 MPa and 0.049 MPa, respectively. It was shown that, for the range of factors studied, pressure and the pressing temperature were the more significant factors in determining the density, MOE and IB. This study showed that the sawdust can potentially be used for the production of binderless boards